Algoflon? D 2510 F
聚四氟(PTFE)
Solvay Specialty Polymers


數據表
PDF(中文)
PDF(英語)
UL 黃卡
購買地點

產品說明： 　

Algoflon? D 2510 F是一種聚四氟 (PTFE)材料,。 該產品在北美洲、歐洲或亞太地區有供貨,。

Algoflon? D 2510 F的主要特性有:

耐化學品
耐熱

Algoflon? D 2510 F的典型應用領域?yàn)?涂覆應用
總體
材料狀態 已商用：當前有效

供貨地區 北美洲
歐洲
亞太地區


特性 低摩擦系數
耐化學性良好
耐熱性高


用途 浸漬應用
涂敷應用


外觀 白色

形式 Latex

物理性能 額定值 單位制 測試方法
pH值 > 9.00 ASTM D4441
密度 1.51 g/m3 ASTM D4441
平均顆粒尺寸 240 nm 內部方法

充模分析 額定值 單位制 測試方法
布絡克菲爾德粘度 - (20°) 25 mPa·s
補充信息 額定值 單位制 測試方法
Non Ionic Surfactant - (on the mixture) 3.0 wt% ASTM D4441
PTFE Content - (on the mixture) 60.0 wt% ASTM D4441
Processing

Algoflon? D 2510 F is processed according to methods generally used for conventional impregnation technology. Generally the procedure involves dip-coating and then heating to remove water and surfactant from the impregnated item. Depending on the application, sintering above the crystalline melting point of the coated resin may be carried out to obtain the finished coated articles. Multiple passes may be required to obtain the desired PTFE load and coating thickness.
Algoflon? D 2510 F can be processed neat or appropriately formulated. Also, it can be used diluted using distilled or deionized water. Formulation, line speed and oven temperature must all be well controlled for optimized features of the coated substrates.

Storage and Handling

Algoflon? PTFE dispersions must be stored under suitable temperature conditions to ensure prolonged stability. Temperatures lower than 5°C must be avoided to prevent irreversible settling. Also, some settling may occur on prolonged standing and/or heat exposure. It is therefore strongly recommended that the product is always kept at temperatures below 35°C. The optimum storage temperature range is 10-25°C. It is also advisable that the product is homogenized by gentle rolling or stirring once per month and prior to use.
Prolonged exposure of the liquid to air could lead to some coagulation at the surface due to water evaporation. For this reason and also to avoid contamination, it is recommended to keep the containers closed when not in use.

Safety and Toxicology

Before using Algoflon? PTFE dispersions consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Venting units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes.
See Material Safety Data Sheet for detailed advice on waste disposal methods.

Packaging

Algoflon? D 2510 F is packaged in either 30 kg drums or 1500 kg IBC's.

Additional Technical Information

For Material Safety Data Sheet or additional technical information consult your Solvay Specialty Polymers sales representative, or contact us by e-mail.

查看全部介紹